Questions answered

What the law actually requires on warehouse racking, what industry good practice adds, and free quotes from rack inspectors.

Get racking inspection quotes

Common questions

How much does a racking inspection cost?

Inspectors quote per site, not from rate cards. They use bay count or run metres, racking type, number of sites, access on the day, out-of-hours attendance and report detail. Six firms publish a starting price (£299 to £550, read October 2026), but the inputs combine differently at every warehouse. Compare the scope of each quote, not just the total.

Is racking inspection a legal requirement in the UK?

The duty is legal; the interval is not. Racking is work equipment, so PUWER 1998 requires it to be maintained in an efficient state and in efficient working order. Regulation 6 requires recorded inspection where safety depends on installation conditions or foreseeable deterioration. No UK regulation sets a racking inspection frequency; annual expert inspection is SEMA's published good practice.

How often should warehouse racking be inspected?

Industry good practice is an expert inspection at least annually by a qualified rack inspector. Add regular in-house visual checks by a nominated person, often weekly, and immediate reporting and checking after any impact. These are recommendations, not statutory intervals: justify your frequency from traffic, racking type, load conditions and damage history, and write it down.

What is a SEMA approved rack inspector?

An individual assessed under the Storage Equipment Manufacturers' Association scheme as competent to inspect storage equipment and classify damage against published criteria. Using one is the recognised way to demonstrate competence, and what insurers and customer audits usually ask for. It is not a statutory requirement and other competent inspectors exist.

What do green, amber and red mean on a racking report?

SEMA risk categories. Green is damage within acceptable limits: monitor and re-check. Amber needs remedial action: offload the location and do not reload until repaired within the inspector's timescale. Red is serious damage requiring immediate offloading and isolation until repair or replacement. Thresholds are measured, so ask for the values as well as the colour.

Who is the person responsible for rack safety?

It is the nominated individual who runs your in-house rack safety regime: carrying out or overseeing regular visual inspections, receiving damage reports, and holding authority to offload a location. The role is industry practice, not a statutory appointment, but nominating and training someone is how most warehouses meet the practical side of their PUWER duties.

What does a SEMA racking inspection cost?

SEMA publishes no price; most inspectors quote per site. Six UK firms published a starting price (read October 2026): £299 to £550, median £445, mostly plus VAT, for a small installation or half day. A large or multi-site warehouse costs more. For a comparable rack inspection quote, give your bay count, racking types and access on the day.

Get inspection quotes